Waterproof bicycle cover and motorcycle cover – how to read our droplet scale

CoverHero Guiden

Is the cover waterproof? Many people ask this, and the answer depends on more than the fabric. That's why we show the water resistance of all covers with droplet icons in the Material & protection box on the product page, just above the wind icons for breathability. Here we explain what the droplets mean, how we rate them and how the two scales work together.

How to read the droplet icons

Icon Level What it means Examples
💧💧💧 High, documented The manufacturer states a hydrostatic head of at least 3.000 mm, or the seams are taped, welded or glued so water cannot get in through the stitching either. Oxford Stormex Premium and Pro, Oxford Rainex, Aquatex Pro, DS Cargo and Protex Stretch Premium
💧💧 Waterproof The manufacturer calls the cover waterproof but does not state a hydrostatic head or taped seams. It keeps out ordinary rain. Bikeparka, Herocape, DS Alfa and most coated bicycle covers
💧 Water-repellent The fabric repels rain and showers but may let water through during prolonged or heavy rain, especially at the seams. Oxford Aquatex (standard) and treated polycotton
– Not waterproof The cover is made for indoor use or transport and protects against dust, scratches and dirt. Oxford Dormex, Protex Stretch indoor and DS Bike Sock

What does hydrostatic head in mm mean?

Hydrostatic head is the most common way to measure waterproofness. Water is pressed against the fabric, and the pressure is measured until the first droplets pass through. The more millimetres, the more water the fabric can keep out. The figure can also be given in Pascal, where 1.000 Pa corresponds to approximately 102 mm hydrostatic head.

For comparison, the European rainwear standard EN 343 requires at least 8.000 Pa, or approximately 816 mm, in the lowest class and 20.000 Pa, approximately 2.040 mm, in the highest. Covers with 3.000 mm or more therefore exceed the requirement for approved rainwear, and top models such as Oxford Stormex Pro state 10.000 mm.

Why the seams matter as much as the fabric

A fabric can be completely watertight while water finds its way through the tiny holes made by the sewing machine. That's why we also give three droplets when the seams are taped, welded or glued, even if the manufacturer does not state a hydrostatic head. If it only says "waterproof" without documentation, we give two droplets. This is a cautious assessment, not a criticism of the cover.

Waterproof and breathable at the same time?

The more tightly sealed a fabric is, the harder it is for moisture inside to escape. That's why the most waterproof covers often have few wind icons, and the most breathable often have few droplets. Manufacturers typically address this with a breathable coating or vents that let moist air out without letting rain in. Read more about the other half of the scale in the guide to the wind scale for breathability.

Both scales together

Need Look for
Bicycle or motorcycle kept outside all year 💧💧💧 or 💧💧 combined with 💨 or 💨💨, so condensation can escape
Short parking in town, e.g. at work 💧💧 is enough for most rain showers
Under a shelter or carport 💧 or 💧💧 with good breathability
Garage, cellar or transport – for water and 💨💨💨 for breathability, so moisture is never trapped

If you need help choosing, you can read waterproof vs. breathable bicycle cover, waterproof vs. breathable motorcycle cover and why condensation forms under a motorcycle cover. The materials behind the icons are explained in the materials guide.

Find the right cover

Frequently asked questions

What do the droplets on the product page mean?

1 to 3 droplets show how well the cover keeps rain out. Three droplets mean documented waterproofness of at least 3.000 mm or taped seams. If there is a dash (–), the cover is not waterproof and is made for indoor use.

Is a cover with two droplets waterproof?

Yes. Two droplets mean that the manufacturer calls the cover waterproof. We only give three droplets when waterproofness is documented by a hydrostatic head or taped seams.

How many mm hydrostatic head should a cover have?

For outdoor use all year round, 3.000 mm or more is a good level. For shorter periods of parking in rainy weather, a cover that the manufacturer calls waterproof is typically enough.

Why isn't the most waterproof cover also the most breathable?

A completely watertight fabric keeps both rain out and moisture in. That's why you should choose a waterproof cover with vents or a breathable coating if the vehicle is kept outside for a long time.

Brug for hjælp til at finde det rigtige overtræk?

CoverHero Assistenten hjælper dig med at vælge det bedste cover til din cykel, ladcykel eller motorcykel på få sekunder. Klik på knappen herunder og start chatten.

Back to blog

More guides you might like

Breathable bicycle cover and MOTORCYCLE cover –...

Is the cover breathable? We show the breathability of all covers using wind icons. Here we explain the levels, the difference between breathable fabric and ventilation, and which level to...

Breathable bicycle cover and MOTORCYCLE cover –...

Is the cover breathable? We show the breathability of all covers using wind icons. Here we explain the levels, the difference between breathable fabric and ventilation, and which level to...

Material guide: What do 210D, PU and PVC mean o...

What do 100D, 210D and 300D mean? What is the difference between PE film, polyester, ripstop and nylon – and between PU and PVC coatings? We explain cover materials in...

Material guide: What do 210D, PU and PVC mean o...

What do 100D, 210D and 300D mean? What is the difference between PE film, polyester, ripstop and nylon – and between PU and PVC coatings? We explain cover materials in...